Air, Water and Petroleum Hose Manufacturer in India
Mangla Rubber Industries manufactures air, water and petroleum hose: a multipurpose industrial hose with an oil-resistant nitrile tube for diesel, lubricating oil, petroleum fluids, compressed air and water. Supplied in bulk coils, cut lengths and complete assemblies for workshops, fuel handling, construction sites and plant utilities.
Request a quote · Mohit Mangla +91 88007 72816 · Karan Mangla +91 99587 34560 · manglarubberind@gmail.com
Air, Water and Petroleum Hose Specifications
| Specification | Detail |
|---|---|
| Tube | Oil and fuel resistant synthetic rubber (NBR) |
| Reinforcement | High-tensile textile braid or spiral, steel wire where pressure requires |
| Cover | Oil, abrasion, weather and ozone resistant synthetic rubber |
| Bore range | 6 mm to 100 mm |
| Working pressure | 10 to 20 bar typical, higher on request |
| Burst pressure | 3 to 4× working pressure |
| Temperature range | −30 °C to +80 °C |
| Media | Diesel, kerosene, lubricating oil, petroleum fluids, compressed air, water |
| Construction | Discharge, or suction with helix wire for collapse resistance |
| Supply | Coils, cut lengths and assemblies with couplings |
Specify suction construction with an embedded helix wire for any line that lifts fluid or strips a tank. A pressure-only hose collapses under vacuum, creases permanently and loses flow.
Why Plants and Distributors Choose Mangla Air, Water and Petroleum Hose
- Nitrile tube suited to hydrocarbons, where EPDM would swell and fail.
- Suction and discharge builds, with helix wire where the line has to lift rather than receive under pressure.
- Abrasion-resistant covers for site and workshop handling.
- Cut-to-length and bulk supply for distributors and maintenance teams, with volume pricing.
- Manufactured in Ghaziabad, Delhi NCR since 1983.
Applications
- Diesel and fuel transfer at depots, sites and workshops
- Lubricating oil and engine oil dispensing
- Compressed air lines on construction and plant equipment
- Water transfer, dewatering and washdown
- Tanker loading and unloading with suction construction
- General workshop and plant utility service
Couplings and End Fittings
Supplied with crimped fittings, camlock and TW couplings for tanker and bulk transfer, Geka and claw couplings for air and water, and BSP or NPT threaded ends. Fitting materials are matched to the media, with stainless steel available where required.
Technical Guides
Hose chemical compatibility chart · Air hose sizing guide · Abrasion resistant hose · Hose connector and fitting types
Frequently Asked Questions
Can one hose carry air, water and diesel?
Yes, a nitrile-tube multipurpose hose handles compressed air, water, diesel and lubricating oil. It is not suitable for acids, alkalis or aromatic solvents, which need a chemical hose.
Why not use EPDM for a fuel line?
EPDM swells badly in petroleum oils and fuels. Nitrile is the correct compound for hydrocarbons; EPDM suits aqueous chemicals, hot water and steam.
Do I need suction construction?
Only if the hose will lift fluid out of a tank or strip a line. Without an embedded helix wire a pressure hose collapses under vacuum and will not recover.
What couplings suit tanker transfer?
Camlock and TW couplings are standard for bulk and tanker work. Dry-disconnect couplings are preferable where spillage on uncoupling matters.
Get a Quote
Send the bore, length, working pressure, media and temperature, and the end fittings you need, and our engineering team will confirm the construction and lead time. Manufacturing at Plot C-2, Sector B-1, Trans Delhi Signature City, Ghaziabad, Uttar Pradesh 201103. Manufacturing hose since 1983.